Forum

Hiawatha version: 6.16
Operating System: OSX 10.4.11 PPC

I installed hiawatha-6.16.mpkg on my G4 Powerbook, and attempted to start up from the preference pane and the shell. In either case, it craps out immediately. Launching #sudo /usr/sbin/hiawatha returns a bus error, while launching from the pref pane results in the following crash dump to hiawatha.crash.log:

Host Name: mac-powerbook-g4-15
Date/Time: 2009-08-15 22:01:01.913 -1000
OS Version: 10.4.11 (Build 8S165)
Report Version: 4

Command: hiawatha
Path: /usr/sbin/hiawatha
Parent: System Preferences [276]

Version: ??? (???)

PID: 279
Thread: 0

Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000

Thread 0 Crashed:
0 libSystem.B.dylib 0x9012c6f0 _malloc_initialize + 56
1 libSystem.B.dylib 0x90002fb8 malloc + 48
2 hiawatha 0x0000fde0 0x1000 + 60896
3 hiawatha 0x00007aa0 0x1000 + 27296
4 hiawatha 0x000085e8 0x1000 + 30184
5 hiawatha 0x00001a54 0x1000 + 2644

Thread 0 crashed with PPC Thread State 64:
srr0: 0x000000009012c6f0 srr1: 0x000000000000f030 vrsave: 0x0000000000000000
cr: 0x44000022 xer: 0x0000000000000000 lr: 0x000000009012c6ec ctr: 0x00000000900013a0
r0: 0x000000009012c6ec r1: 0x00000000bffff890 r2: 0x00000000a0001fa4 r3: 0x0000000000000000
r4: 0x0000000000000000 r5: 0x0000000092b049f8 r6: 0x0000000000000002 r7: 0x0000000000000002
r8: 0x0000000000000003 r9: 0x0000000000000000 r10: 0x00000000900010f0 r11: 0x00000000a00061ec
r12: 0x00000000900013a0 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
r20: 0x0000000000000000 r21: 0x0000000000000000 r22: 0x0000000000000000 r23: 0x00000000000000e8
r24: 0x000000009fffc6c0 r25: 0x0000000000000000 r26: 0x0000000000000001 r27: 0x00000000bffffe20
r28: 0x00000000a0002f90 r29: 0x00000000a000c6c0 r30: 0x0000000000000001 r31: 0x000000009012c6c0

Binary Images Description:
0x1000 - 0x1cfff hiawatha /usr/sbin/hiawatha
0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib
0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91d0b000 - 0x91df9fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x92a15000 - 0x92b03fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x9503a000 - 0x95069fff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x95937000 - 0x95961fff libxslt.1.dylib /usr/lib/libxslt.1.dylib

As a sanity check, I build, installed, and ran the same revision from source. The default static page pops right up.

Thanks for your bugreport. I will check it out asap.